customized gift for kids

solid throw pillow coversCompany News
solid throw pillow covers DIY Bike Handlebar Bag Pattern customized gifts for mom
Updated: 2020-03-06 Views: 61

Summer is in full swing and I find myself in the mood to tackle some fun summer sewing projects! Amy from Ameroonie Designs is here with us today sharing the perfect summer sewing pattern. Follow along and learn how to make these fun DIY Bike Handlebar Bags.

Summer break is always so much fun, long bike rides, trips to get ice cream and days with no schedules.

personalized toys

I love when my kids go out on adventures on their bikes. To make it easier for them to carry their treasures (or maybe some money for the ice cream), I designed this darling pouch to attach to the handlebars of their bikes.

This Bike Pouch tutorial is fat quarter friendly and sews up in just a couple of hours.

You could swap out some laminated fabric in place of the exterior fabrics to make it a bit more weatherproof.

I’m so excited to share with you this tutorial so you can sew up some bike pouches for the kids in your life. Or maybe even for yourself!

If you want to add a coordinating mini wallet to your DIY bike handlebar bag or pouch to hold moneysolid throw pillow covers, I have a fantastic beginner wallet tutorial.

Or a darling zipper pouch pattern.

I designed this darling pouch to attach to the handlebars of their bikes. This Bike Pouch tutorial is fat quarter friendly and sews up in just a couple of hours. You could swap out some laminated fabric in place of the exterior fabrics to make it a bit more weather proof if you like.

Fuse fleece to the wrong side of one of the 1 ¼;” X 3” and 1 ¼;” X 8” rectangles

Pair the 1 ¼;” X 3” pieces, 1 ¼;” X 8” pieces and 2 ½;” X 5” into sets of two with wrong sides together.

Sew around all four sides of each pair, leaving an opening for turning on one long side of each. Back stitch at beginning and ending of stitching.

Clip corners and turn right side out.

Press, turning under the seam allowance of the opening.

Top stitch around all four sides of each piece.

Cut 1 ¾;” strips of both sides of Velcro (hook and loop) Sew the hook piece of Velcro on one short end of the 2” X 4 ½;” pieces.

Sew the loop piece of Velcro on the opposite end, AND other side of the pieces.

*TIP: I recommend sewing around the Velcro a couple of times to ensure the pieces stay firmly in place.

Sew the 2 ½;” X ¾;” strap around the center bar of the slide by folding over about ¾; to 1 inch of the strap and sliding the center bar in. *TIP I find it easiest to do this by using a zipper foot and moving my needle to the left to allow me to get as close as possible to the slide

Sew the 9 ½;” X 3 ¼;” rectangles to the top of the 9 ½;” X 11 ¼;” rectangles.

Press seam toward the accent piece.

Fuse the 9” X 13 ½;” pieces of fleece to the wrong side of both exterior pieces

Top stitch just to the side of the seam on the accent side of the exterior pieces.

Take the strap with the slide and center it 2” from the bottom of one of the exterior pieces. Sew into place.

Take the two handlebar straps and place them 1 ½;” in from each side of the other exterior piece. The top of the strap should be lined up with the seam of the accent piece. Mark the strap 2” down from the top and sew along the line to hold in place on the exterior of the bag. I like to reinforce the straps by sewing over the stitches multiple times. *NOTE: you may need to position the straps differently depending on the kind of handlebar you are going to use it on. I recommend pinning the straps and place and testing it out on the bike before sewing down the straps.

Take both exterior pieces and both lining pieces and put them right sides together.

Sew around both long sides and the bottom of each piece- Make sure to leave a 2-3” opening on the bottom of the lining to turn the bag right side out.

Mark the bottom corners of both lining and exterior pieces with a 1 ½;” square.

Cut out the marked square.

Pull the corners of the cut out square and bring the side and bottom seams together. This will create a straight line. Pin in place and then sew along the line to box the bottom of the pouch. Repeat for both corners of the lining and exterior of the pouch.

Turn the exterior of the pouch right side out.

Slide the exterior of the pouch inside the lining, match up the side seams and pin around the top edges, lining them up as you go.

Sew around the top of the pouch.

Turn the bag right side out through the opening in the lining. Fold under the seam allowance of the opening of the lining and stitch it shut.

Push the lining inside the exterior of the pouch and press the top seam. Top stitch around the opening of the pouch.

Center the ¾;” X 7 ½;” strap on the top of the back side of the pouch (the side with the handlebar straps), position it ½;” from the seam between the accent piece and main body. Sew around the strap that overlaps the pouch (but only on the back side of the pouch)

Fold over the top of the pouch about ½;” above where the handlebar straps are attached. I like to press the fold to crease it.

Please read all directions before beginning. This pattern has been made and used on different kinds of bicycles, but the handlebar straps may require adjustments for the specific bike you are making the pouch for. It is suggested that you make a sample strap to ensure it will fit around the handlebar of the bike. The positioning of the handlebar straps may also require adjustments for optimal fit.

Seam allowances are ?”

The final step is to attach the pouch to the handlebars of your kiddos bike and watch them smile!

Hi! My name is Amy Chappell and I blog over at?Ameroonie Designs.?I currently live in Wyoming with my husband and 6 kids. I love being a mom but needed an outlet that would give me something to do that stayed done, enter sewing and creating. Love the satisfaction of taking fabric and ideas and making something new. I also love that blogging has given me a way to meet new people and find a community of amazing people who love fabric and sewing as much as I do. xoxo, Amy Ameroonie Designs www.amerooniedesigns.com

Summer Sling Pouch:https://amerooniedesigns.com/how-to-sew-a-simple-sling-bag-for-kids/

Tiered Pillowcase dress:?https://amerooniedesigns.com/wonderland-tiered-pillowcase-dress/

Free Toddler Backpack Sewing Pattern

How to Make Drawstring Backpacks

Splash Proof Phone Case Sewing Pattern

Hello! I’m Allie, BERNINA Brand Ambassador and the creator?behind style and sewing blog,?allie J. This July, I’ll be leading you through the construction of a vintage dress as part of the Vintage Pattern Pledge. I have participated in this yearly event each year since the start, and love how all things vintage take over sewing blogs around the world in celebration!

A couple of weeks ago I posted a fun tutorial on “How to make a felt sunflower pillow”. And never in my wildest dreams did I imagine that post would have as huge of a response as it has. Yet, I’m very happy for it…to say the least!!!So…since it was such a hit, I decided to make another felt pillow, but this time in the form of a butterfly. And this one is just as easy to make and equally adorable. So I made three!

Father’s Day is Sunday, June 21st!